How To Make Honeycomb In Photoshop

"According to all known laws of aviation, in that location is no way that a bee should be able to wing. Its wings are too small-scale to get its fat little body off the ground. The bee, of form, flies anyway. Considering bees don't intendance what humans think is impossible." (quote from Bee Flick).

In this tutorial, you volition acquire how to create a stylish illustration with a  honeybee, honeycomb, and flowers. Seems equally if y'all'll need to describe a lot, correct? Only yous won't, because you lot will create everything using bones shapes which are already installed in Adobe Illustrator and volition use few effects like Roughen and Pucker & Bloat.

You will too learn how to make a precipitous corner on an ellipse and how to move anchor points. Y'all will use the Scissors Tool to cutting a path and cutting unneeded parts using the Pathfinder panel. I will also evidence you how to brand the wings transparent.

I was surprised past the number of beautiful creature vectors on Envato Marketplace. Why non get some inspiration from these creative illustrations?

1. Create the Bee

Step 1

The size of your new document doesn't matter—y'all just need to create a new one. Let'due south start past creating the trunk of our bee. Exist sure to have the stroke color deleted and set up the fill up color (the colour code shown beneath). Using the Ellipse Tool (L) and while holding downward the Shift key, create a circumvolve. You demand to hold the Shift central to draw an even circumvolve.

Keeping it selected, go to Effect > Warp > Arc Upper. So expand this shape (Object > Expand Advent).

Footstep 2

In this footstep, nosotros need to combine ii shapes: the one that nosotros just created and a triangle. These shapes together will brand upward the body of the bee. To draw a triangle, you will utilize the Polygon Tool. After you click on the art board, a new dialogue window will pop up. Enter 3 Sides and any Radius.

Place those two shapes together as you see in the epitome beneath. Select them both and press the Unite button on the Pathfinder panel (Window > Pathfinder). Yous merely made one shape from two shapes (warped circle and triangle).

To brand this new shape look a bit fluffy like the real bee, let's apply the Roughen upshot. Go to Effect > Misconstrue and Transform > Roughen and utilise the options you see below.

Step 3

Add a chocolate-brown ellipse using the Ellipse Tool (Fifty), and place it backside the body. It's the head of the bee. You probably already have the rough issue on the head. If not, continue the head selected and apply the Roughen result with the aforementioned options as y'all did for the body (Effect > Misconstrue and Transform > Roughen).

Your options may vary—it depends on how big the caput is.

Step iv

Take the Rectangle Tool (One thousand) and, using the aforementioned fill color as for the head, add a tiny rectangle. Place it on the left side of the head and rotate it a picayune scrap to the left. This rectangle is already roughened, merely we don't need the roughening effect. To delete the rough issue, on the Appearance panel (Window > Appearance), grab the word "Roughen" and motility it to the trash icon. Then add together a tiny circle on top of information technology. We only created one antenna of the bee.

Let'due south create some other antenna: select the one that you lot simply created, andright-click> Transform > Reverberate. Check Axis Vertical, Angle xc degrees and printing Copy. The correct antenna is done too.

At present we demand to add the Roughen effect just for the circles, using the same options as you did for the torso and head. Expand every shape which has the rough effect (Object > Expand Appearance).

Footstep 5

Allow'south add some stripes.

When you create a rectangle now using the Rectangle Tool (M), it will already have the rough effect. Place it over the bee'due south body. Holding the Shift and Alt keys together, move information technology down, and you will notice that now you accept two rectangles. Always retrieve to expand the Roughen effect.

Side by side, we need to cutting those rectangles. Just first, create a copy of the body (Control-C, Control-F), and and then cut it (Control-X) and place over the body (Control-F). At the moment we have two bodies, one over the other. The first i we leave every bit it is, and the second will exist the cutter for the rectangles.

Now select the upper body, which volition be the cutter, and those two rectangles. Go to the Pathfinder console and press the Ingather push. Your image should look like below.  You can also make clean up the backlog rectangles: select them, and become to Object > Path > Make clean Up... Exist certain to accept all options checked in the new dialogue window, then press OK.

Stride 6

On to the wings. Describe an ellipse. You will need to get a sharp corner with the assistance of the Catechumen Anchor Betoken Tool (Shift-C). Click on the left ballast point. Then take the Direct Pick Tool (A) and select the summit and lesser anchor points. Shift them to the right. I wing is done.

Step 7

Identify the wing on the right side of the bee's body. While keeping it selected, right-click> Transform > Reflect. Remember what you did to go the 2d antenna? We'll repeat everything—a new dialogue window volition appear, and then yous bank check off Axis Vertical, Angle 90 degrees and press Re-create. Shift it to the left, and the left wing is done.

Practise you take the Transparency panel open? If not, go to Window > Transparency. Select the 2 wings and brand Blending Fashion Screen and lower the Opacity to 70%. Now the wings should be transparent.

ii. Create the Honeycomb

Stride 1

Hit the Polygon Tool and click on your art board. Enter three Sides in the new dialogue window, and press OK. While holding downwardly the Alt central (for making a copy), drag this polygon downwardly diagonally. Yous should go a copy. Create a third polygon using the same method.

Footstep 2

Place your honeybee over the polygons and tilt it slightly to the left.

iii. Create the Flowers

Footstep 1

We demand the Polygon Tool again. Once you accept it, create a polygon with five Sides. After that, go to Effect > Misconstrue & Transform > Crease & Bloat and set the slider to twoscore%. Voilà! This is our blossom.

Set a chocolate-brown fill up color (which we used for the head and stripes of the bee) and create three tiny ellipses on the flower. Group the whole blossom (right-click > Group).

Step 2

Make two more copies of the blossom and place them equally shown beneath.

Step iii

Prepare a brown stroke colour with no make full and draw a circle. Brand a thick stroke on the Stroke panel. Place it behind the flowers.

Stride four

In this stride, you can suit the flowers nicely over the dark-brown stroke circle. Take the Scissors Tool (C) and click on the circle, as marked in the image beneath.

Delete the right part of the circle by pressing the Delete push on your keyboard and you should get the same image as below. You lot tin also bank checkRound Cap on the Stroke panel.

Step 5

Accept the Arc Tool and add two more than trivial twigs on height. That's the branch for our flowers.

Step six

The next thing nosotros're going to exercise is to create a simple bud. Make sure to accept the stroke colour deleted and fix a brown fill color. Recall the wings we created for the bee? Take a copy of a wing and identify information technology as shown in the second epitome. Select both shapes and press the Minus Front button in Pathfinder. Add an ellipse behind with the aforementioned fill color equally we did for the flowers by using the Heart Dropper Tool (I). That's the bud.

Footstep 7

Create two more buds and place them on top of the co-operative.

4. Create the Background

Step 1

Using the Rectangle Tool (M) and while holding down the Shift key (to create an even shape), depict a square.

Stride 2

Place the background behind everything that y'all created earlier. And that's it, love beekeepers!

Awesome Work, You're Done!

You did a swell job! You created an illustration with a honeybee using just a few basic shapes. You've learned how to apply the Roughen effect and how to cut shapes using the Pair of scissors Tool.

You used the Polygon Tool a lot too—creating a triangle, hexagon, and pentagon. Now you even know how to make a shape transparent and how to cut a shape using another one every bit a cutter. I can tell you that you are good at it. Cheers for sticking with me through the whole process!

Source: https://design.tutsplus.com/tutorials/how-to-create-a-honeybee-on-a-honeycomb-in-adobe-illustrator--cms-26416

Posted by: caseyunation.blogspot.com

Share this post